SmartWand: go to Design => Options => the Design Menu will open (outlined in green in the image below) => Select 3D preferences => general =>...

The grid is a 2D feature, so it doesn't appear in elevation view (a 3D feature). But you can use this workaround: you can apply a grid texture on the ba...

There are steps to draw wall at different angle: 1 - Draw horizontal wall 2 - Select wall 3- Rotate ( Edit -> Rotate..) it by inserting the desired angle...

There are 2 situations: 1 - Exterior walls => in Punch, the exterior walls must be an enclosed perimeter. In this enclosed perimeter, the walls share th...

The STL file format is used a lot for 3D printing. This is a tutorial at Shapeways site with some tips: https://www.shapeways.com/tutorials/viacad You can...

The Gripper is a great tool to use reposition, rotate and scale objects on the fly but did you know you can also reposition The Gripper itself? This can com...

1. Click on the “Deep Select” tool then the line, notice that the line and its control points are highlighted.  2. Grab one of the points and move it. The ...

In your Punch program, you can use all the elements of the Drawing Draw Styles Tab and customize the 2D appearance of any element or component (walls, floor...

1. Open a existing template file from the following location Application> ViaCAD > layouts> English 2. Select a view placed into the template. Once...

Because the doors designed with the Door Designer Power Tool are components and they are just part of the library (not part of a project). When you apply a ...